Product ID:EUTECROD 157
MSDS Date:09/18/1986
FSC:3439
NIIN:00-833-3473
MSDS Number: BQFBJ

EUTECTIC CORP

40-40 172ND STREET
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-358-4000

Info Phone: 718-445-1784

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

TIN

CAS: 7440-31-5

RTECS: XP7320000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9293

SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

LD50 LC50 Mixture:UNCLASSIFIED BRAZING FUMES=5MG/M3 PEL
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:SILVER-SILVER IS CORROSIVE. ULCERATION
AND EYE BURNS ARE TREATED BY USING COPIOUS AMOUNTS OF WATER.
TIN-EYE, SKIN AND RESPIRATORY SYSTEM IRRITATION FROM FUMES.
Explanation of Carcinogenicity:THIS PRODUCT CONTAINS C
[7440-43-9], AN OSHA REGULATED CARCINOGEN.
Effects of Overexposure:SHORT TERM OVEREXPOSURE TO WELDING FUMES MAY
RESULT IN DISCOMFORT SUCH AS DIZZINESS, NAUSEA, OR DRYNESS OR
IRRITATION OF NOSE, THROAT OR EYES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:REMOVE TO WELL VENTILATED AREA. CALL FOR MEDICAL AID. EMPLOY
FIRST-AID TECHNIQUES RECOMMENDED BYTHE AMERICAN RED CROSS.

Flash Point:NONFLAMMABLE
Unusual Fire/Explosion Hazard:WELDING ARC & SPRAKS & BRAZING FLAMES CAN
IGNITE COMBUSTIBLES & FLAMMABLES. REFER TO ANSI Z49.1 FOR FIRE
PREVENTION DURING THE USE OF WELDING & ALLIED PROCESSES

Spill Release Procedures:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT.

Handling and Storage Precautions:READ AND UNDERSTAND THE MANUFACTURERS
INSTRUCTIONS AND THE PRECAUTIONARY ALBEL ON THE PRODUCT.
Other Precautions:PROVIDE PROTECTIVE SCREENS TO SHIELD OTHERS. WHEN
ELECTRODES AND FLUXES ARE CONSUMED, THE FUME AND GAS DECOMPOSITION
PRODUCTS GENERATED ARE DIFFERENT IN FORM FROM THE INGREDIENTS
LISTED. NEW COMPOUNDS NOT IN THE ELECTRODES MAY FORM.

Respiratory Protection:USE NIOSH APPROVED RESPIRABLE FUME RESPIRATOR OR
AIR SUPPLIED RESPIRATOR WHEN WORKING IN A CONFINED SPACE OR WHERE
LOCAL EXHAUST OR GENERAL VENTILATION DOES NOT KEEP EXPOSURE BELOW
RECOMMENDED LIMITS.
Ventilation:USE ENOUGH GENERAL & LOCAL VENTILATION AT THE ARC, OR BOTH,
TO KEEP THE FUMES & GASES FROM THE WORKER BREATHING ZONE.
Protective Gloves:WELDERS LEATHER GLOVES
Eye Protection:OSHA APPROVED GOGGLES/FACE SHIELD W/LENS
Other Protective Equipment:DARK FLAME RETARDANT CLOTHING WHEN CUTTING,
GRINDING OR BRAZING INCLUDING ARM & SHOULDER PROTECTORS, APRON, AND
HAT.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING, DRINKING OR
SMOKING. LAUNDER CONTAMINATIED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
BRAZING FUMES & GASES CANNOT BE CLASSIFIED SIMPLY. THEIR COMPOSITION
AND QUANTITY ARE DEPENDENT ON THE METAL BEING WELDED, THE
PROCEDURES, PROCESSES AND THE TYPE OF WIRE OR ELECTRODES USED.
OTHER INFL UENCING FACTORS ARE THE PRESENCE OF CONTAMINANTS.
CHLORINATED SOLVENTS AND FLUORIDE FLUXES MAY DECOMPOSE TO TOXIC
GASES.

HCC:N1

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:BRAZING FUMES AND GASES CANNOT BE
CLASSIFIED SIMPLY. THE DECOMPOSITON PRODUCTS ARE DIFFERENT FROM THE
ROD INGREDIENTS.

Waste Disposal Methods:DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE
CONTAINER OR LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER IN FULL
COMPLIANCE WITH FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.